New OSHA Silica Exposure Rules

new osha silica exposure in construction

New OSHA Silica Exposure Rules

Updated: December 22, 2023

Exposure to crystalline silica has long been known to cause potential health risks in humans. OSHA has standards with reduced permissible limits to further protect workers’ exposure to respirable silica.

Finishing Systems takes the safety and health of our employees seriously and you should too. We strive to keep our valued customers abreast of changes and developments affecting our industry.

If you have any questions or would like more information on the revised silica standards, we encourage you to visit OSHA’s website, or you can use their On-Site Consultation Program for professional guidance. This program helps you identify and reduce the risk of silica and other hazards in your workplace.

The two new standards cover:

  1. Construction workers
  2. General industry and maritime workers

While the standards for construction workers have been in effect since September 23, 2017, provisions for general industry and maritime workers took effect on June 23, 2018. These new standards apply to workers in contact with loose silica products — for blasting, abrasion, foundry, etc. — as well as those who perform tasks that create airborne silica from solid materials, such as stones, masonry, concrete, stones, bricks and others.

Definition of What Crystalline Silica Is

What Is Crystalline Silica?

Crystalline silica is a mineral from Earth’s crust. It’s commonly found in construction materials like sand, stone, concrete and mortar. Workers also use crystalline silica in products like glass, pottery and ceramics.

The mineral is available in many forms, including:

  • Quartz: This is the most common form of crystalline silica. It’s one of the most abundant minerals on Earth’s surface, found in nearly every type of rock. Because of its abundance, most construction and mining locations use quartz.
  • Cristobalite: In comparison, cristobalite is a rare form of crystalline silica. It’s usually found in volcanic rocks or meteorites and sometimes forms when you heat quartz at high temperatures.
  • Tridymite: This form of crystalline silica is also rare. Exposures to tridymite are very rare in the workplace.

When employees grind crystalline silica into tiny particles, it can travel into their lungs, creating breathing problems and leading to diseases.

The Effects of Silica

Respirable silica is silica dust that humans can inhale. It is at least 100 times smaller than a typical grain of sand. Many construction and industry activities can create this fine dust when working with stones, brick, mortar and other silica-containing materials in ways such as:

  • Cutting
  • Sawing
  • Drilling
  • Grinding
  • Pulverizing
  • Crushing

Abrasive blasting, hydraulic fracking and foundry work can also create respirable silica. Once liberated into the air, unprotected workers risk inhaling the crystalline silica, which can lead to increased incidents of several silica-related illnesses, including:

  • Silicosis, which is an incurable lung disease that can be fatal
  • Lung cancer
  • Chronic obstructive pulmonary disease (COPD)
  • Kidney disease
Explanation of How Workers Are Exposed to Crystalline Silica

How Are Workers Exposed to Crystalline Silica?

Crystalline silica is a component in many construction materials. Because of this, numerous workers face constant exposure and potential health hazards. As workers complete common construction work tasks, the crystalline silica turns into respirable silica and enters their lungs.

Tasks like these could expose construction workers to crystalline silica:

  • Using saws, drills, jackhammers or powered handheld chipping tools
  • Operating vehicle rigs or crushing machines
  • Milling
  • Using demolition machines
  • Using abrasive blasting tools
  • Tunneling operations

OSHA estimates over 600,000 workplaces are exposed to respirable silica each year. Employee exposure to crystalline silica can lead to severe health issues, so OSHA has developed safety standards to limit the effects and keep workers safe.

OSHA Silica Exposure Standards

OSHA standard 1926.1153 addresses respirable crystalline silica exposure. It requires employers to limit worker exposure to silica and enact protective measures when exposure is unavoidable. Supervisors must follow OSHA control methods or independently design dust control measures. All workplaces with crystalline silica must adhere to the permissible exposure limit (PEL).

Table 1 in OSHA’s respirable silica standard outlines various construction processes and the accompanying dust control methods. Employers should use the table for guidance on exposure protection.

For example, one task on the table is operating a saw outdoors. The OSHA standard states that if an employee uses the saw outside for four hours or less, they wouldn’t need a respirator. But if they worked for more than four hours or indoors with the saw, the employee would need a respirator or additional protective elements.

Alternatively, employers who don’t use Table 1 are required to determine the amount of silica exposure and enact protective elements. They must use dust control methods to keep workers safe and provide respirators.

OSHA’s standard also requires all construction employees to:

  • Write an exposure control plan: Employers must establish a plan listing all tasks that expose workers to respirable silica. Then, it needs to list all the protective measures in place on the construction site.
  • Assign a competent person: The competent person must be present on the site and is responsible for reinforcing the exposure control plan.
  • Offer medical exams: The standard requires employers to provide employee medical exams, including X-rays and lung function tests. Employees using respirators more than 30 days each year need to be tested every three years.
  • Train workers about health hazards: Employers are also responsible for educating workers on the health hazards of silica. They should thoroughly explain the importance of protective measures and how employees can stay safe while working.
  • Keep records of silica exposure: OSHA requires employers to keep records of silica exposure and medical exams.

Solutions for Crystalline Silica Inhalation

More than 2 million Americans are exposed to silica throughout their careers. If proper protections aren’t used, workers are at risk of silica inhalation. Solutions to crystalline silica inhalation can include:

  • Personal protective devices, like masks and filters
  • General protective devices, such as filtration devices
  • Regular cleaning, aspiration and removal of loose silica particles and dust
Silica Exposure Protection for Workers

Protecting Workers With Help From Silica Exposure

Here at Finishing Systems, we take the health of our employees and customers seriously. We have recently conducted monitoring and professional testing for our workplace.

Please contact us for safety equipment and supplies to ensure that your company and its employees are properly protected. We have an extensive line of safety products to help you protect the most valuable assets in your workplace — your workers!

Archive

Select Month
  • Select Month
  • December 2023
  • May 2023
  • March 2023
  • January 2023
  • October 2022
  • September 2022
  • August 2022
  • July 2022
  • June 2022
  • May 2022
  • April 2022
  • March 2022
  • February 2022
  • January 2022
  • December 2021
  • November 2021
  • October 2021
  • September 2021
  • August 2021
  • July 2021
  • June 2021
  • May 2021
  • April 2021
  • March 2021
  • February 2021
  • January 2021
  • December 2020
  • November 2020
  • August 2020
  • July 2020
  • June 2020
  • May 2020
  • March 2020
  • February 2020
  • January 2020
  • December 2019
  • November 2019
  • October 2019
  • September 2019
  • July 2019
  • June 2019
  • May 2019
  • April 2019
  • March 2019
  • February 2019
  • December 2018
  • May 2018
  • April 2018